Home

Home

Home

There are 24 products.

Showing 1-24 of 44 item(s)

Active filters

  • Brand: MOOSE RACING
  • MOOSE BRAKE CALIPER PIN REAR
    17020249

    €12.00
    Brake Caliper Pins Each kit includes required quantities of brake pad hanger pins Made by Nissin, the OE manufacturer in Japan  ...
  • MOOSE RACING HARD-PARTS...
    09345258

    €37.00
    Water Pump Rebuild Kit Include every gasket, O-ring, bearing and seal required to rebuild a water pump Typical kit includes the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located on water pump shaft and copper drain washers MakeModelDisplacementYearCountryEngineInfoPositionYAMAHAYZ 125125199...
  • MOOSE RACING HARD-PARTS...
    09345197

    €38.00
    Water Pump Rebuild Kit Include every gasket, O-ring, bearing and seal required to rebuild a water pump Typical kit includes the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located on water pump shaft and copper drain washers  ...
  • WATER PUMP REPAIR KIT...
    09345191

    €44.95
    Water Pump Rebuild Kit Include every gasket, O-ring, bearing and seal required to rebuild a water pump Typical kit includes the following: bearings where applicable; rubber seals; mechanical water pump seal where applicable; side cover gasket; water pump gasket; snap rings located on water pump shaft and copper drain washers...
  • MOOSE RACING HARD-PARTS...
    09340112

    €78.99
    Complete Gasket and Oil Seal Kit Moose can now handle all your gasket and seal needs at a fraction of OEM cost High-tech materials provide unmatched reliability and performance Rebuild the engine and transmission with total confidence as each set is designed for durability and accurate fit Oil seals are genuine OEM replacement seals Sets include all gaskets and oil seals necessary to rebu...
  • REAR SHOCK SEAL HEAD KIT KTM
    1314-0052

    €40.00
    Complete assemblies, ready to install into the shock body Made from 6061-T6 aluminum and the same custom elastomer as our fork seals All have air bleed holes to help remove air from the oil reservoir during installation Double lip oil seal designed to keep out dirt and keeps friction low Some models have updated designs for easier installation Includes: aluminum body, dust seal, bushing, oi...
  • LINKAGE BEARING SEAL KIT...
    1302-0055

    €90.00
    LINKAGE BEARING KITS Include the lower shock bearing and all other parts necessary to rebuild the suspension linkage 52100 bearing steel and hard-plated spacers resist wear and rust Each kit includes the lower shock bearing, all the shafts, seals and spacers in the link, link arm and lower shock mount Make Model Displacement Year Country Engine Info Position HONDA CR 125 R...
  • MOOSE RACING KTM/HUSKY...
    13020158

    €60.00
    52100 bearing steel is used in these rebuild kits for motocross, off-road, and dual purpose bikes Kits include all the bearings, seals, shafts, and spacers required for a complete rebuild Expansive application chart covers bikes from the 70’s to the present Make Model Displacement Year Country Engine Info Position HUSABERG FE 250 250 2013 AMERICA HUSABERG FE ...
  • UPPER SHOCK BEARING RM/KX
    A291002

    €20.00
    Kit includes the shock bearing, seals, spacers, and pins (if required) to rebuild the shock link Premium design and construction stands up to tough conditions...
  • MOOSE RACING HARD-PARTS...
    A28-1089

    €69.95
    Swingarm Bearing Kit Repair kits include all the bearings, seals, shafts and spacers required for a complete rebuild Constructed from OEM-quality components at a fraction of the cost  ...
  • MOOSE RACING VENT HOSE WHITE
    07030743-WHITE

    €5.00
    Moose Racing aluminum vent caps are a high quality replacement for the standard rubber vent hoses Built in one way valve that allows airflow in, but not out Available in Black, Blue, Green, Orange, Red, and Silver...
  • MOOSE RACING GASKET KIT...
    M810505

    €15.93
    Top End Gasket Kit Moose can now handle all your gasket and seal needs at a fraction of OEM cost High-tech materials provide unmatched reliability and performance Rebuild the engine and transmission with total confidence as each set is designed for durability and accurate fit Oil seals are genuine OEM replacement seals Performance sets designed for a piston replacement Includes every gaske...
  • REAR SPROCKET / 48 TEETH /...
    12101788

    €29.50
    Steel Rear Sprocket Manufactured from premium-quality C45 high-carbon steel CNC precision-machined to assure tight tolerances Machined with lightening holes Black powder-coated finish...
  • MOOSE RACING CLUTCH CABLE KX85
    0652-1998

    €19.00
    Clutch and Throttle Cable assemblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded rubber components for high UV resistance ...
  • MOOSE RACING CLUTCH CABLE...
    06521749

    €19.00
    Clutch and Throttle Cable assemblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded rubber components for high UV resistance ...
  • STEERING STEM BEARING KIT
    0410-0034

    €39.99
    Make Model Displacement Year Country Engine Info Position KAWASAKI GPZ 1100 1052 1995 ALL 100 PS/ 74 KW KAWASAKI GPZ 1100 1052 1996 ALL 100 PS/ 74 KW KAWASAKI GPZ 1100 1052 1997 ALL 100 PS/ 74 KW KAWASAKI KX 250 250 1992 ALL KAWASAKI KX 125 J 125 1992 ALL 39 PS/ 29 KW KAWASAKI KX 250 250 1993 ALL KAWASAKI ...
  • MOOSE RACING CONTROL CABLE...
    0652-1686

    €19.00
    Clutch and Throttle Cable assemblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded rubber components for high UV resistance &...
  • MOOSE RACING HARD-PARTS...
    06501203

    €29.99
    Black Vinyl Throttle Cable Black PVC outer jacket for maximum flexibility and durability Steel inner casing is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird-caged prior to terminal casting for superior pull-out resistance EPDM molded rubber components for high UV resistance and long life Inject...
  • CLUTCH COVER GASKET KX80...
    M817486

    €7.50
    Clutch Cover Gasket Moose can now handle all your gasket and seal needs at a fraction of OEM cast High-tech materials provide unmatched reliability and performance Rebuild the engine and transmissions with total confidence as each set is designed for durability and accurate fit Oil seals are genuine OEM replacement seals These individually sold gaskets are great when replacing a clutch or t...
  • CARB REPAIR KIT HON
    10030701

    €53.00
    Carburetor Repair Kit Each kit contains all necessary gaskets, O-rings, float valve and jets Supplied to Moose Racing by the same supplier the OEMs use Complete kits to rebuild OEM carburetors...
  • VALVE SHIM 7.48X1.50
    7.48X1.50VALVE SHIM

    €1.46
    Replacement Valve Shims Complete valve shim kits make it easier to maintain your valve train Forged from 4140 cold rolled steel, not sintered Laser-etched size on each shim for identification 7.48mm diameter shim kit includes three shims of each size from 1.20mm to 3.50mm in 0.05mm increments, fitting all Japanese 250F models 8.90mm shim kit includes three shims of each size from 1.72mm to ...
  • MOOSE RACING THROTTLE...
    06501238

    €17.00
    Clutch and Throttle Cable assemblies Black PVC outer jacket for maximum flexibility & durability Steel inner casing that is tightly coiled for low compression ratios A pre-lubricated nylon inner sleeve guarantees smooth operation and long life All wire ends are bird caged prior to terminal casting for superior pull-out resistance EPDM molded rubber components for high UV resistance &amp...